Panasonic PT-DZ8700U User Manual

Page of 129
Important Safety Notice
2
 - ENGLISH
Important  
Information
Important Safety Notice
Dear Panasonic Customer:
The following information should be read and understood as it provides details, which will enable you to operate 
the projector in a manner which is both safe to you and your environment, and conforms to legal requirements 
regarding the use of projectors. Before connecting, operating or adjusting this projector, please read these 
instructions completely and save this booklet with the projector for future reference. We hope it will help you to 
get the most out of your new product, and that you will be pleased with your Panasonic DLP™ Based projector.
The serial number of your product may be found on its bottom. You should note it in the space provided below 
and retain this booklet in case service is required.
Model number: PT-DZ8700U/PT-DS8500U/PT-DW8300U
Serial number:
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DONOT EXPOSE THIS PRODUCT 
TO RAIN OR MOISTURE.
Power Supply:
This Projector is designed to operate on 120 V, 60 Hz AC, house current only.
CAUTION:
The AC power cord which is supplied with the projector as an accessory can only be used for 
power supplies up to 125 V, 7 A. If you need to use higher voltages or currents than this, you will 
need to obtain a separate 250 V power cord. If you use the accessory cord in such situations, fire 
may result.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the 
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may 
be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of 
important operating and maintenance (servicing) instructions in the literature accompanying the 
product.
CAUTION:
This equipment is equipped with a three-pin grounding-type power 
plug. Do not remove the grounding pin on the power plug. This plug 
will only fit a grounding-type power outlet. This is a safety feature. If 
you are unable to insert the plug into the outlet, contact an electrician. 
Do not defeat the purpose of the grounding plug.
Do not remove
Pursuant to at the directive 2004/108/EC, article 9 (2)
Panasonic Testing Center
Panasonic Service Europe, a division of Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, F.R. Germany
NOTICE:
This product has a High Intensity Discharge (HID) lamp that contains mercury. Dispose may be regulated in 
 
your community due to environmental considerations. For disposal or recycling information, please contact 
your local authorities, or the Electronic Industries Alliance: http://www.eiae.org