Panasonic PT-DZ8700U User Manual
52
- ENGLISH
Settings
PICTURE menu
z
(
Æ
page 49).
z
(
Æ
page 50).
PICTURE MODE
The user can switch to the desired picture mode
suitable for the image source and the environment in
which this projector is used.
suitable for the image source and the environment in
which this projector is used.
Press ▲▼ to select [PICTURE MODE].
1 )
Press ◄► to switch [PICTURE MODE].
2 )
The setting will change as follows each time
z
◄► is pressed.
STANDARD
CINEMA
NATURAL
USER
DICOM SIM.
GRAPHIC
DYNAMIC
STANDARD
The picture becomes suitable for
moving images in general.
moving images in general.
CINEMA
The picture becomes suitable for
movie sources.
movie sources.
NATURAL
The picture complies with sRGB.
DICOM SIM.
The picture becomes similar to
DICOM Part14 gray scale.
DICOM Part14 gray scale.
DYNAMIC
The light output is maximized for use
in bright areas.
in bright areas.
GRAPHIC
The picture becomes suitable for
input from to the personal computer.
input from to the personal computer.
USER
You can set your favorite picture
mode.
mode.
Note
[STANDARD] for moving images.
DICOM is an abbreviation for “Digital Imaging and
DICOM is an abbreviation for “Digital Imaging and
Communication in Medicine”, which is a standard for
medical imaging devices. Although the name “DICOM” is
used, this projector is not a medical device. Accordingly,
do not use the projected images for medical diagnosis or
similar usage.
When <ENTER> button is pressed while a [PICTURE
medical imaging devices. Although the name “DICOM” is
used, this projector is not a medical device. Accordingly,
do not use the projected images for medical diagnosis or
similar usage.
When <ENTER> button is pressed while a [PICTURE
z
MODE] other than [USER] is selected, the setting is
saved and will be used as the preset value next time
a signal is inputted. At this time, all the data except
[SYSTEM SELECTOR] in the [PICTURE] menu are
saved.
The factory default of [USER] is the image conformed to
saved and will be used as the preset value next time
a signal is inputted. At this time, all the data except
[SYSTEM SELECTOR] in the [PICTURE] menu are
saved.
The factory default of [USER] is the image conformed to
z
ITU-R BT.709 Standard.
J
Changing the name of [USER]
Select [USER] in step 2).
1.
Press <ENTER> button.
2.
A screen showing details of the [PICTURE
z
MODE] will be displayed.
Press ▲▼ to select [PICTURE MODE
3.
NAME CHANGE].
Press <ENTER> button.
4.
The [
z
PICTURE MODE NAME CHANGE]
screen will be displayed.
Press ▲▼◄► to select characters
5 )
and press <ENTER> button to input
them.
Press ▲▼◄► to select [OK], and
them.
Press ▲▼◄► to select [OK], and
6.
press <ENTER> button.
The picture mode name is changed.
z
PICTURE MODE NAME CHANGE