Airlink101 AR410W User Manual
18
4. Web Configuration Utility
Step 1
Open the web browser and type 192.168.1.1 in the URL Address field and press
Enter.
Step 2
Enter admin for both the username and the password fields and click OK.
4.1.1 LAN & DHCP Server
This page enables you to set the LAN and DHCP properties such as the host name, IP
address, subnet mask, and the domain name. LAN and DHCP profiles are listed in the
DHCP table at the bottom of the screen.
address, subnet mask, and the domain name. LAN and DHCP profiles are listed in the
DHCP table at the bottom of the screen.
Host Name: Type the host name (if available) in the text field. The host name is
provided by your ISP and is required by some ISPs for Internet connection.
IP Address: This is the IP address of the router. The default IP address is 192.168.1.1.
You may change it to suit your existing LAN environment.
Subnet Mask: Type the subnet mask for the router in the text field. The default subnet
mask is 255.255.255.0.
DHCP Server: Enables the DHCP server function which allows the router to
automatically assign IP addresses to devices connected to the LAN. DHCP is enabled
by default. All DHCP clients are listed in the table at the bottom of the screen, providing
the host name, IP address, and MAC address of each client.
Start IP: Enter an IP address to serve as the start of the IP range that DHCP will use to
assign IP addresses to all LAN devices connected to the router.