Airlink101 AR410W User Manual
25
4.2.3 Advanced
This screen enables you to configure advanced wireless functions.
Beacon Interval: Type the beacon interval in the text box. You can specify a value from
1 to 1000. The default beacon interval is 100.
RTS Threshold: Type the RTS (Request-To-Send) threshold in the text box. This value
stabilizes data flow. If data flow is irregular, choose values between 256 and 2432 until
data flow is normalized.
Fragmentation Threshold: Type the fragmentation threshold in the text box. If packet
transfer error rates are high, choose values between 256 and 2432 until packet transfer
rates are minimized. (NOTE: setting the fragmentation threshold value may diminish
system performance
.)
DTIM Interval: Type a DTIM (Delivery Traffic Indication Message) interval in the text
box. You can specify a value between 1 and 65535. The default value is 3.
TX Rates (Mbps): Select one of the wireless communications transfer rates, measured
in megabits per second, based upon the speed of wireless adapters connected to the
WLAN.
11g Only Mode: If enabled, the router will only communicate in 11g mode (54 Mbps).
Antenna Transmit Power: select from full, half, quarter, eighth, min.
box. You can specify a value between 1 and 65535. The default value is 3.
TX Rates (Mbps): Select one of the wireless communications transfer rates, measured
in megabits per second, based upon the speed of wireless adapters connected to the
WLAN.
11g Only Mode: If enabled, the router will only communicate in 11g mode (54 Mbps).
Antenna Transmit Power: select from full, half, quarter, eighth, min.