Powerware P93 User Manual

LanSafe software 

x 

x 

LanSafe software & ConnectUPS MultiServer card, IBM FC 2933

x 

x  

NetWatch software & ConnectUPS Web/SNMP card, IBM FC 2934

x

LPARS

1 

x

x

x

IBM Director Snap-in 

x

x

x

PowerVision software 

x

x

x

x

x

FORESEER Software

x

x

x

x

x

ConnectUPS relay card & AS400 cable, IBM FC 2936

x

NOTE: One (1) X-Slot relay card and interface cable included with P93. 1. Use ConnectUPS Web/SNMP/xHub card, IBM FC 2934 to support LPAR (POWER 4 Chip Set) servers. For pSeries configurations: each LPAR
needs a network connection and will install Powerware provided NetWatch or LanSafe V software.

Real-world business applications require a complete range of battery management and testing features, including battery runtime remaining, lifetime remaining,

battery health, and notification, to help make critical decisions, from scheduling preventive maintenance to load shedding.  Advances in firmware, digital

technology and battery monitoring techniques enable the Powerware P93 to offer sophisticated battery management features, previously available only in

expensive add-on systems.  By ensuring optimal battery health and availability, DC Expert Plus raises the reliability of the Powerware P93 far beyond any other

UPS in this kVA range.

A Powerware Battery Lifetime Monitor

uses measures of chronological time, number of battery discharges, battery temperature, and system loading 

to determine battery lifetime remaining.

A Battery Runtime Remaining Monitor

uses system loading plus internal sensing points for voltage and current data to calculate runtime remaining.

A Advanced Battery Management (ABM

uses patented three-stage charging technique that not only increases battery service life, but also optimizes

recharge time.

A Battery Circuit Test (BCT)

performs a periodic test of the battery string to ensure that there are no open circuits that would jeopardize battery 

performance and system availability.

A Temperature Compensated Charging (TCC)

monitors the battery temperature and through sophisticated algorithms adjusts the rate of charge, 

compensating for the ambient temperature to prolong the life of the battery.

A Intelligent Battery Protection (IBP)

automatically adjusts the shutdown voltage of the batteries based on the length of  the AC outage. This prevents

severe battery discharge if the system is lightly loaded.

The intelligent communications capability of the Powerware P93 family of UPS means improved reliability, easier network power management and expanded 
network communications. With both hardware and software communications options, Powerware provides the right communications solution for your specific
situation.

LanSafe version 5 delivers comprehensive support including graceful, remote shutdown of UPS systems and network monitoring tools via serial, USB, and network
connectivity options.  LanSafe's exclusive SafetyNet Technology provides Network Shutdown functionality and enables network administrators to shut down the
most critical equipment last. 

Powerware Extensions for IBM Director provide seamless integration of Powerware UPSs into the Director management system. The Extensions for IBM Director
simplify network management tasks for critical elements of server power protection. System administrators can easily monitor, diagnose, configure, set alarms,
schedule self-tests, check battery, gather inventory information, and control Powerware UPSs network wide from a single console within IBM Director. 

PowerVision power management software can monitor up to 64 network devices, provide data archiving and analysis to pre-
vent power problems, and offers sophisticated notification, plus Modbus

connectivity. Through its easy-to-use graphical user

interface, PowerVision provides critical information about the power, network-wide, in real time.

FORESEER environmental monitoring software puts an end to worries about risks to your critical foundation equipment and

systems. From air conditioners to water cooling systems, generators to UPS, FORESEER gives you up-to-the-minute information about any system or device
that is fundamental to your system availability. Plus, with its unique data archiving capabilities, FORESEER can identify potential problems before they occur,

and notify you so you can implement a solution before a crisis.

Powerware’s ConnectUPS-X and communications adapters provide a self-contained link between the UPS and the Ethernet
LAN/WAN. Using HTTP, Telnet or SNMP, you can easily monitor, manage, and shut down or reboot remote UPS-protected
servers, routers, hubs and other key network devices in a controlled manner. These adapters are also compatible with many
third-party network management software packages.