DELL K792N User Manual

54

|

Operation

Configure the UPS settings for an installed EBM, including whether to run automatic battery tests and
automatic restart configuration.

If the UPS is not configured for the EBM, the UPS reports less battery time remaining on the UPS front
panel and to any remote software. You may receive a shutdown warning prematurely. To ensure
maximum battery runtime when using power management software, configure the UPS for the EBM:

1

Press the 

 

button for one second to go to the main menu selection and scroll down to the

Settings menu using the   button.

2

Press the 

 button to enter the Settings menu.

3

Use the   button to scroll to the External Battery Module option and press the 

 button.

The battery number value begins to flash.

4

Set the battery number value using the   and   buttons.

UPS only (internal batteries)

0 (default)

UPS + 1 EBM

1

 Runtime is automatically adjusted based on present load levels and whether an EBM is configured.

5

Press the 

 button to confirm.