Blomberg TKF 7230 User Manual

14 - EN

If you wish to dry your clothes at a later 

time, thanks to the time delay function, 

you can delay the program start up to 3 

hours, 6 hours or 9 hours.

1.  Open the loading door and put the

laundry in.

C

 Make sure that all air outlets are open,

door filter is cleaned and the water 

tank is empty.

2.  Set the drying program, temperature, 

spin speed and, if required, the 

auxiliary functions.

3.  When the time programming button 

is pressed once, a 3 hour delay is 

selected and the relevant led lights. 

When the same button is pressed 

again, 6 hours; and if pressed once 

more, 9 hours delay will be selected. 

If the time programming button is 

pressed one more time, time delaying 

function will be cancelled. Set the time 

delay as you require.

4.  Delayed operation of the selected 

program is started by pressing the 

"Start/Pause/Cancel" button after

selecting the time delay. 

C

  Additional laundry may be loaded / 

taken out during the time delay period.

If you want to cancel the time delay 

countdown and start the program:

1.  Press “Start/Pause/Cancel” button

for about 4 seconds. The “:” in the

middle of the screen will stop flashing. 

“Start/Pause/Cancel” light will go off

and the remaining time on the screen 

disappears.

2.  Press "Start/Pause/Cancel" button to

start the program right away.

1.  Press "Start/Pause/Cancel" button to

start the program.

2.  “Start/Pause/Cancel” button will light

up to indicate that the program has 

started.

Your machine will send out an audio

warning when the program comes to an 

end. 

If you do not want to hear this 

buzzing, you need to press the “Cancel

Audio Warning” button.  The relevant LED 

will light up when this button is pressed 

and an audio warning will not be given 

when the program comes to an end.

C

 You can select this function either

before or after the program starts.

C

  Warning indicators may differ 

according to the model of your 

machine.

A warning LED will light up as long as the 

child-proof lock remains activated.

A warning LED will light up to remind filter 

cleaning after the program finishes.

C

  If the filter cleaning warning lights up 

continuously, please refer to, “Solution

suggestions for problems”.

A warning LED will light up at the end of 

the program or when the tank is full with 

water.  The machine stops operating 

when this warning LED lights up during a 

program running.  To restart the machine, 

please drain the water in the water tank.  

Press "Start/Pause/Cancel" button to start

the program after you have emptied the 

water tank. The warning LED goes off and 

the program resumes operating.

It will light up periodically after maximum 5 

drying cycles for the purpose of reminding.

In this case and after drying, clean as 

explained in the section “Maintenance and

Cleaning”.