Avocent 3008/3016 User Manual
22 AutoView 3008/3016 Switch Installer/User Guide
3.
Reboot the Sun servers. After rebooting, each Sun server will request the country code setting
stored in the IQ module.
stored in the IQ module.
NOTE: If you wish to reboot the target devices by power-cycling them, you must wait 90 seconds before
rebooting. A soft reboot may be performed without waiting 90 seconds.
rebooting. A soft reboot may be performed without waiting 90 seconds.
Configuring network settings
Use the Network dialog box to set the Network Speed, Transmission Mode and Network
Configuration feature.
Configuration feature.
To change network settings:
1.
If the OSCAR interface is not open, press
Print Screen
to open the Main dialog box.
2.
Click
Setup - Network to open the Network dialog box.
Figure 3.7: OSCAR Interface Network Dialog Box
3.
Make desired changes and click OK to confirm or click X to exit without saving.
NOTE: Changing the network settings will cause the switch to reboot.
Assigning device types
To access the OSCAR interface Devices dialog box:
1.
Activate the OSCAR interface and click Setup - Devices to open the Devices dialog box shown
in Figure 3.8.
in Figure 3.8.
NOTE: The Modify button is available only if a configurable switch is selected.