Panasonic FZG1AABACRM User Manual

26

 C 

Touch [Change advanced power settings] and double-touch [Display].

 D

  Double-touch [Enable adaptive brightness], make necessary settings, and touch [OK].

 Set each item to ON, and the brightness of the screen display will adjust automatically.

 The ambient light sensor is located at the top of LCD.

 The ambient light cannot be detected properly if this area is obstructed or dirty.

l

 

 The magnetic sensor on the computer operates by detecting geomagnetism. Therefore, the

magnetic sensor may not function properly and it readings may be inaccurate, especially in

the following environments.

Ÿ

Inside or near steel structures such as buildings or bridges

Ÿ

Inside or near automobiles, or near train power lines

Ÿ

Near metallic furniture or appliances

Ÿ

When the AC adaptor or other peripheral devices are brought closer to the computer

Ÿ

Near magnets, speakers, or other objects with strong magnetic fields

 The magnetic directions indicated by the magnetic sensor may not be accurate immediately

after purchase or in environments with poor magnetic fields.

 In such cases, turn on the computer and move it as follows.
 A

 Hold the computer so that its screen side is facing upward and level.

 B

 While keeping the computer level, rotate it 90 degrees or more clockwise.

 C

 Return the computer to position A, and rotate it 90 degrees or more counterclockwise.

 D

 Return the computer to position A.

 E

  Tilt the computer 90 degrees or more to the left so that the left side of the computer tilts

down.

 F

  Return the computer to position A, and tilt it 90 degrees or more to the right so that the

right side of the computer tilts down.

 ● Hold the computer firmly when moving it. Strong shocks from dropping the computer may

result in damage.

CPE02725ZA_FZ-G1mk1_8_7_OI_E.indb   26

2013/02/07   10:31:18