Toshiba ProT1!0 User Manual

The wireless LAN function-wiring diagram is shown below: 

 

 

Any of the connections may be defective. Disassemble the computer following the steps 
described in Chapter 4, Replacement Procedures, and perform the following checks: 

  Make sure the wireless communication is Enabled in BIOS setup. 

Check 1    

, change it to "Enabled". If the 

problem still occurs, perform Check 2. 

Check 2  Make sure wireless LAN card is firmly connected to the CN22 on system board. If 

the connector is defective, connect it firmly and perform Procedure 1. If the 
problem still occurs, perform Check 3. 

Check 3  Make sure that wireless LAN antenna cables (black and white) are firmly 

connected to the connectors on Wireless LAN card. If wireless LAN antenna 
cables are not connected properly, connect them firmly and perform Procedure 1. 
If the problem still occurs, go to the procedure 3. 

 

If the Wireless communication is "Disabled"