Sony UP-GR700 User Manual

Mi
sc
el

lane

ou
s

Precautions

20

It is recommended that you store the ink ribbon and 
paper roll in the package they came in after you 
remove them.

Attach the tape next to the left side of the ink ribbon 
base as illustrated.

Put the large cushion back in place in the front door.

Put the paper core shaft, without a paper roll, inside 
the printer.

Close the front door.

Put the printer back in its original packing material.

Clean the cabinet with a soft dry cloth, or a soft cloth 
lightly moistened with a mild detergent solution. 
Do not use any type of solvent, such as alcohol or 
benzine, or a chemical cloth, which may damage the 
finish.

When a vertical white stripe appears on the printout or 
the color distribution becomes uneven, clean the thermal 
head and the paper feeding section, such as guide rollers, 
bottom section and paper tray section.
Also, it is recommended that you clean the thermal 
head and paper feeding section whenever you replace 
the ink ribbon and paper roll.

Since the thermal head is still very hot just after printing 
is finished, be careful not to touch the thermal head 
when cleaning it. Touching the thermal head may burn 
you and may cause damage to the thermal head.

Clean the thermal head with a soft cloth moistened with 
ethyl alcohol.

Do not use a fuzzy cloth.

Clean the guide rollers gently with a soft cloth 
moistened with water while turning them.

Tape

Paper tray section

Bottom section

Guide rollers