Sony UP-GR700 User Manual

O

p

er

at

io

n

Loading the Paper Roll and Ink Ribbon

9

The following printing pack is made especially for
the UP-GR700.
Be sure to use the ink ribbon and the paper roll in the
carton as a set.

2UPC-R710 Self-Laminating Color Printing 
Pack
Ink ribbon for printing: 2
Paper roll: 2 rolls
One set of the ink ribbon and paper roll allows you to 
print about 170 printouts of 203 × 254 mm size (8 × 10 
inch size). 
You can make printouts of either 203 × 254 or 203 × 305 
mm size (8 × 10 or 8 × 12 inch size) using the 2UPC-
R710 Self-Laminating Color Printing Pack. 203 × 254 
mm size (8 × 10 inch size) is the default setting. 
You can select the desired size for your printouts using 
the printer driver. 
For detailed information, refer to the instructions for the 
printer driver included on the CD-ROM disc supplied.

When you make only 203 × 254 mm size (8 × 10 inch 
size) printouts, one set of the ink ribbon and paper roll 
allows you to print about 170 printouts. However, if you 
make printouts of 203 × 305 mm size (8 × 12 inch size) 
too, using the same roll of ink ribbon, the total number 
of printouts will decrease. Also, some portion of the ink 
ribbon may be left over. Do not use this left-over ink 
ribbon. Replace both the paper roll and ink ribbon at the 
same time.

• One set of the ink ribbon and paper roll allows you to 

print about 170 printouts of 203 × 254 mm size (8 × 10 
inch size). Do not replace the printing pack if it has 
only been partially used. The number of printouts that 
can be printed may not be guaranteed if you replace 
the ink ribbon and paper before they have run out.

• We recommend that you put on gloves when handling 

the paper roll.

• Stand the paper roll up vertically. If you place the 

paper roll horizontally, the paper roll may roll around 
and fall. This may cause an injury.

• Hold the paper roll with both hands so that you do not 

drop it, because it is heavy. Dropping it may cause in 
an injury.

When you use the printer for the first time, load the 
paper roll and ink ribbon.
If the paper roll or the ink ribbon runs out while printing 
is in progress, replace both paper roll and ink ribbon at 
the same time. When you replace the used up paper roll 
and ink ribbon with the new ones, you have to remove 
the old ink ribbon and paper roll first.
For detailed information on how to remove the paper roll 
and ink ribbon, see “Removing the Ink Ribbon and 
Paper Roll” on page 14.

When you use the printer for the first time, be sure to 
remove packing materials put in the printer before 
loading the paper roll and ink ribbon. 

Hold the paper roll with both hands.