Sony UP-CR20L User Manual

48

Preparing for Printing Using Bluetooth

®

 Communication / System Settings

  Cha

p

te

r 4  

A

d

v

a

n

c

ed Set

tings

J Expansion CompactFlash card required

Using an optional Bluetooth USB adaptor

1)

, you can print 

images sent wirelessly from Bluetooth-compatible devices 
such as mobile phones. The same print services that are 
available when printing from a memory card are also 
available when sending images via Bluetooth 
communication. 

1) For more on compatible Bluetooth USB adaptors, see “Optional 

accessories” on page 81 of “Specifications.”

The following preparations are necessary in order to use 
Bluetooth communication for printing.
• Insert an expansion CompactFlash card 

Make sure that an expansion CompactFlash card is 
inserted in the expansion CompactFlash slot at the top of 
the unit.

• Insert a Bluetooth USB adapter (sold separately)

Insert a Bluetooth USB adapter into the USB port (host) 
at the top of the unit.

Compatible profiles
This unit supports the following profiles.
• BIP (Basic Imaging Profile)
• OPP (Object Push Profile)
For details on profiles supported by your Bluetooth-
compatible device, refer to the operating instructions for 
your device.

What is a profile?
A profile is a set of definitions used for Bluetooth 
communication. There are a number of different profiles 
that are used, depending on the purpose and specific 
characteristics of the devices involved. To communicate 
via Bluetooth, both devices must support a common 
profile.

Determines whether a beep is heard while performing 
operations or when an error occurs.

To turn the beep on or off, touch the [ON] or [OFF] button 
under [Beep] on the System tab of the administration 
screen.

J Expansion CompactFlash card required

Using an optional wireless adaptor

1)

, you can send images 

from a digital camera with built-in wireless functions 
through camera operations. For details on settings and 
operations for the wireless adaptor, refer to the operating 
instructions for your wireless adaptor.

1) A Silex Technologies SX-WSG1 is required. For details, please visit the 

UP-CR20L support page at http://www.sony.net/snaplab.

You can also configure how the images are processed after 
they are sent. The following options are available for 
selection under [Network Option].

Print the sent images. After printing is finished, the sent 
images will be deleted from the expansion 
CompactFlash card.

Print the sent images and store them on the expansion 
CompactFlash card. Stored images can be printed from 
the Save folder.