Kodak 1200i User Manual
KODAK
1200i WIDE-FORMAT PRINTING SYSTEM
Technical Training Guide
33
R
R
o
o
u
u
t
t
i
i
n
n
e
e
M
M
a
a
i
i
n
n
t
t
e
e
n
n
a
a
n
n
c
c
e
e
IMPORTANT:
It is suggested to perform a weekly cleaning action on the printer (i.e.
every Monday morning for 20 minutes
) instead of attempting to remember the user
guide cleaning intervals.
A.
Clean the following assemblies:
1. Encoder Strip (lint-free swabs dampened with Windex® or a mild dish soap and
water solution). Thoroughly clean the top and bottom surfaces of the entire length
of the encoder strip (including the area near the service station; access cartridges
to move carriage out). Repeat procedure with new swabs until no ink residues are
observed on swab surfaces.
of the encoder strip (including the area near the service station; access cartridges
to move carriage out). Repeat procedure with new swabs until no ink residues are
observed on swab surfaces.
NOTE:
Windex solution should be mainly used on printers running pigment inks.
2. Service Station (lint-free towel/lint-free swab dampened with a mild dish soap &
water solution). Gently clean service station seals & wipers; ensure the outside
edges of the wipers are thoroughly cleaned.
edges of the wipers are thoroughly cleaned.
CAUTION:
do not remove the service station to clean (only Authorized Service
Providers should remove the service station when necessary).
3. Slide Shaft (lint-free towel dampened with Windex solution or isopropyl alcohol).
Thoroughly clean the entire length of the slide shaft, including the portion near the
service station zone.
service station zone.
NOTE:
do not apply solutions directly on the
carriage bushings; allow shaft to dry before
moving carriage assembly.
moving carriage assembly.