Kodak 6000 User Manual
13
Chapter 2
Docking and Charging the Camera
Docking your camera lets you make prints directly from the camera, transfer
pictures from the camera to the computer, and charge the camera battery.
pictures from the camera to the computer, and charge the camera battery.
1
Make sure the battery is installed in the camera. See your camera user’s
guide for details.
guide for details.
2
On the camera bottom, locate the
connector.
connector.
3
Place the camera in the printer dock and
push down to seat the connectors.
push down to seat the connectors.
Charging begin when camera enters auto
power-off. See your camera user’s guide
for details.
power-off. See your camera user’s guide
for details.
The camera is now powered by the printer
dock instead of the camera battery.
dock instead of the camera battery.
m
The Kodak EasyShare Ni-MH rechargeable
battery pack and Li-Ion rechargeable
batteries take 2.5 to 3.0 hours to fully
charge.
battery pack and Li-Ion rechargeable
batteries take 2.5 to 3.0 hours to fully
charge.
m
After the battery is charged, leave the
camera in the printer dock to maintain the
full charge.
camera in the printer dock to maintain the
full charge.
m
The three green charging lights monitor the
charging status (see
charging status (see
).
1 Battery is less than half charged.
2 Battery is more than half charged.
3 Battery is fully charged.
2 Battery is more than half charged.
3 Battery is fully charged.
1
2
3
urg_00041.book Page 13 Friday, January 3, 2003 10:37 AM