Kodak 3000 User Manual
Using Easy Config
May 2000
3-7
Ink Depletion - The value you set determines the amount of ink that is
applied to the media. The normal value is 100 percent. Decreasing the
value can cause image quality problems.
applied to the media. The normal value is 100 percent. Decreasing the
value can cause image quality problems.
Note: The normal value is 100 percent. Decreasing the value can cause
image quality problems. Setting the Ink Depeletion for 100% is
adequate for most conditions.
adequate for most conditions.
Cut Media - Select this check box if you want the printer to cut the media
after printing.
after printing.
Note: Certain types of media, such as EI canvas, can not be cut due to the
thickness of the media.
Dry Time - Enter a value for how long the printer waits before cutting in
the Dry Time field.
the Dry Time field.
Connection Type - Select the type of connection the printer has to your
host computer in the Connection Type list.
host computer in the Connection Type list.
Parallel Port - Select the local port to be used if the printer is connected
using a parallel port.
using a parallel port.
IP Address - Enter the IP address for the printer if it has a network
connection.
connection.
Updating Media Files
Adding New Media on the Media Tab
1.
Click Add Media.