Genicom 3400e User Manual

  C d   39

Three label sensors on the printer require regular cleaning: 

•  Label taken sensor 

•  Label mark sensor 

•  Label gap sensor 

Turn the On/Off switch to the off position and remove the power cord. 

Remove the media cover. 

Rotate the head lift lever clockwise to release the printhead. Rotating the 
head lift lever raises the printhead to allow access to the label mark 
sensor. 

Remove the media and ribbon (if necessary). 

Clean the label taken sensor with a cotton swab moistened with 
isopropyl alcohol. 

3XXXU.036