Konica Minolta BIZHUP C351 User Manual
Setting Up Network Printing
3
C351
3-5
3.2
Setting the IP Address for This Machine
Use this machine’s control panel to assign an IP address to this machine.
2
Reminder
When specifying network settings, follow the instructions of the network
administrator.
administrator.
Setting the IP Address
1
Press the [Utility/Counter] key on this machine’s control panel, touch
[Administrator Setting], and then enter the administrator password.
[Administrator Setting], and then enter the administrator password.
–
The administrator password is required in order to enter Adminis-
trator mode. Ask the administrator of this machine for the adminis-
trator password.
trator mode. Ask the administrator of this machine for the adminis-
trator password.
2
Touch [Network Setting], then [TCP/IP Setting].
3
Specify settings for the following:
IP Address: Set the IP address of this machine.
Subnet Mask: Set the subnet mask for the network to which you are
connecting.
Default Gateway: Set the default gateway address for the network to
which you are connecting.
Subnet Mask: Set the subnet mask for the network to which you are
connecting.
Default Gateway: Set the default gateway address for the network to
which you are connecting.
4
To apply the settings, restart this machine (turn it off, then on again).
–
When turning the main power switch OFF then ON, wait for 10 sec-
onds or longer before turning it ON again; otherwise the copier may
not function normally.
onds or longer before turning it ON again; otherwise the copier may
not function normally.
Turn this machine back on to apply the IP address.