Nikon MPS100 User Manual
NetWare Configuration
5 - 7
The print server has successfully
attached to the queue
attached to the queue
Type NETSTAT at the Local> prompt. This will display
information about Þleservers, printers, and queues that
the print server has found. If a queue is in JobPoll, the
print server has successfully attached to the queue.
information about Þleservers, printers, and queues that
the print server has found. If a queue is in JobPoll, the
print server has successfully attached to the queue.
The DSTree, DSContext, and
DSLicense
DSLicense
Type Show Protocol NetWare NDS. This command
shows the tree and the context that you have conÞgured,
a failure code, and an NDS error code for each server.
shows the tree and the context that you have conÞgured,
a failure code, and an NDS error code for each server.
DSTree is the directory service tree on which the print
server is located. DSContext is the context where the
print server is located; it must match the context on the
Þle server (The DSContext must be of the following form:
ou=fruit.o=exotic). DSLicensed should be yes.
server is located. DSContext is the context where the
print server is located; it must match the context on the
Þle server (The DSContext must be of the following form:
ou=fruit.o=exotic). DSLicensed should be yes.
Printer and queue changes have
propagated through the NDS tree
propagated through the NDS tree
It may take a few minutes for the changes to propagate.
If the print server doesnÕt attach, reboot the server.
If the print server doesnÕt attach, reboot the server.
Table 5-2:
NetWare Host Troubleshooting (NDS), cont.
Area to Check
Explanation