Lexmark X466de User Manual
•
The power cord is plugged into the printer and a properly grounded electrical outlet.
•
The electrical outlet is not turned off by any switch or breaker.
•
The printer is not plugged into any surge protectors, uninterrupted power supplies, or extension cords.
•
Other electrical equipment plugged into the outlet is working.
Once you have checked each of these possibilities, turn the printer off and then back on. This often fixes the problem
with the scanner.
with the scanner.
Scan was not successful
These are possible solutions. Try one or more of the following:
C
HECK
THE
CABLE
CONNECTIONS
Make sure the network or USB cable is securely connected to the computer and the printer.
A
N
ERROR
MAY
HAVE
OCCURRED
IN
THE
PROGRAM
Turn off and then restart the computer.
Scanning takes too long or freezes the computer
These are possible solutions. Try one or more of the following:
O
THER
SOFTWARE
PROGRAMS
MAY
BE
INTERFERING
WITH
SCANNING
Close all programs not being used.
T
HE
SCAN
RESOLUTION
MAY
BE
SET
TOO
HIGH
Select a lower scan resolution.
Poor scanned image quality
These are possible solutions. Try one or more of the following:
C
HECK
THE
DISPLAY
FOR
ERROR
MESSAGES
Clear any error messages.
T
HE
SCANNER
GLASS
MAY
BE
DIRTY
Clean the scanner glass with a clean, lint-free cloth dampened with water. For more information, see “Cleaning
the scanner glass” on page 228.
the scanner glass” on page 228.
A
DJUST
THE
SCAN
RESOLUTION
Increase the resolution of the scan for a higher quality output.
Troubleshooting
272