Samsung SRP - 350 User Manual

2 

This equipment has been tested and found to comply with the limits for a Class A digital device 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 

against harmful interference when the equipment is operated in a commercial environment. This 

equipment generates uses, and can radiate radio frequency energy and , if not installed and used 

in accordance with the instruction manual, may cause harmful interference to radio 

communications. Operation of this equipment in a residential area is likely to cause harmful 

interference in which case the user will be required to correct the interference at his own 

expense. 

This Apparatus complies with class “A” limits for radio interference as specified in the Canadian 

department of communications radio interference regulations. 

 

Get appareil est conforme aux normes class “A” d’interference radio tel que specifier par ministre 

canadien des communications dans les reglements d’interference radio. 

Some semiconductor devices are easily damaged by static electricity. You should turn the printer 

“OFF”, before you connect or remove the cables on the rear side, in order to guard  the printer 

against the static electricity. If the printer is damaged by the static electricity, you should turn the 

printer “OFF”. 

The SRP-350, SRP-350S, SRP-350P and SRP-350U Roll Printer are designed for use with 

electronic instruments such as system ECR, POS, banking equipment, computer peripheral 

equipment, etc. 

 

The main features of the printer are as follows: 

1.  High speed printing : 35.5(1/6” Feed) lines per second. 
2.  Low noise thermal printing. 
3.  RS-232(SRP-350), RS-485(SRP-350S), Parallel(SRP-350P), USB(SRP-350U) 
4.  The data buffer allows the unit to receive print data even during printing. 
5.  Peripheral units drive circuit enables control of external devices such as cash 

drawer. 

6.  Characters can be scaled up to 64 times compared to it’s original size. 
7.  Bar code printing is possible by using a bar code command. 
8.  Different print densities can be selected by DIP switches. 

 

 Please be sure to read the instruction in this manual carefully before using your new   

 SRP-350/SRP-350P.

NOTE : The socket-outlet shall be near the equipment and it  
       shall be easy accessible.