Seiko Instruments DPU-30 User Manual

 

 
The surface of thermal paper is specially processed using the chemical agent. And the color rises 
through the thermo chemical reaction process. Be aware of the following points. 
 

1)  Store the papers in a dry, cool and dark place. 
2)  Do not rub the papers with hard substance. 
3)  Keep the papers away from organic solvent. 
4)  Do not let the papers touched with vinyl chloride film, eraser or adhesive tapes for hours. 
5)  Do not put the papers on diazo print or wet copy that is just copied 
6)  Use the water-based glue (for example, starch glue and synthetic glue) when you glue 

thermal paper. 

7)  Adhesive tape may discolor the surface of thermal paper. Put two-sided tape on the back 

side of thermal paper if you need to tape it. 

8)  If you touch thermal paper with sweaty hand, your fingerprint may be left on the surface of 

thermal paper and the characters may printed unclearly. 

9)  If you use this printer to print receipts given to your customers, print the notice which states 

that the paper used is thermal paper and the instructions on how to keep it. 

10)  Use dedicated thermal papers only. 

 
 
1.4  NOTES ON INSTALLATION

 
Avoid such places with: 
 

1) Dusty 

places 

2)  Unstable places and places that significantly shakes 
3)  Watery and oily places 
4)  Places which receive direct sunlight 
5)  Places where the temperature is 50°C or higher 
6)  Places where the temperature is 0°C or lower 
7)  Places where the electromagnetic interference or corrosive gas is generated 
8)  Places where the relative humidity is over 80% 
9)  Places where the significant temperature change may result in the formation of any 

condensation