Xerox -07W & -11W User Manual
3-10
Keyboard Configuration
To enable the cursor keys permanently so that the Alt key does not have to be held
down when you want to use them, press the keys Alt + Num Lock together so that
the Num Lock indicator is not lit. To make the cursor keys generate their numeric
values again, press Alt + Num Lock. The Num Lock indicator should be lit.
down when you want to use them, press the keys Alt + Num Lock together so that
the Num Lock indicator is not lit. To make the cursor keys generate their numeric
values again, press Alt + Num Lock. The Num Lock indicator should be lit.
Remapping The Keyboard
The Keyboard Macros dialog box enables you to redefine the function of most of the
keys on your keyboard and shows the mapping of the keyboard for the current
terminal emulation mode. This dialog box is displayed by selecting Keyboard
Macros in the Settings menu.
keys on your keyboard and shows the mapping of the keyboard for the current
terminal emulation mode. This dialog box is displayed by selecting Keyboard
Macros in the Settings menu.
Two keyboard layouts are displayed. The upper layout corresponds to the keyboard
you are using, which will be one of the following: 101 key, 102 key, 84 key, Digital's
LK250 or LK450, or KEA Systems' PowerStation, depending on the type specified
within Microsoft Windows Setup for your PC.
you are using, which will be one of the following: 101 key, 102 key, 84 key, Digital's
LK250 or LK450, or KEA Systems' PowerStation, depending on the type specified
within Microsoft Windows Setup for your PC.
Note: When an LK250, LK450 or PowerStation keyboard driver is
loaded, the SYSTEM.INI file is scanned by TeemTalk to see
if the string "LK250", "LK450" or "PowerStation" is
present and maps the keyboard accordingly.
if the string "LK250", "LK450" or "PowerStation" is
present and maps the keyboard accordingly.
The lower layout represents the keyboard associated with the terminal currently
being emulated, as specified in the Emulation Settings dialog box.
being emulated, as specified in the Emulation Settings dialog box.