Xerox 8830 User Manual

 

A: Left 

D: Register 

B: Exit 

E: Input 

C: Right 

 

 

c)  Observe the Display.  The status of the covered optical paper sensor 

changes from NO to YES if the sensor is okay.. 

d)  Move the sheet of paper fully to the left and right to check the LEFT 

and RIGHT sensors. 

10.  To check the status of the thick document sensor: 

a)  Raise the Thick Document Lever.  The status of the sensor will 

change from NO to YES. 

b)  When finished viewing the status of the thick document sensor, lower 

the Thick Document Lever. 

11.  To check the status of HOME sensor. 

a)  Raise the Document Handler just enough to access the Calibration 

Roll drive gear and still be able to see the Display. 

b)  Rotate the Calibration Roll one full revolution, the status will change 

from NO to YES if the sensor is okay.