Xerox 8830 User Manual

The Output Format option allows you to select the size to which the roll 
feed media will be cut.  It has three modes - Manual, Preset, and 
Synchro. 

Manual allows you to enter the desired length and width manually. 

To select the Manual mode: 

1.  Press the key beneath Output Format until the Manual indicator 

lamp illuminates.  The CUSTOM OUTPUT FORMAT screen is 
displayed. 

CUSTOM OUTPUT FORMAT

 ENTER CUSTOM MEDIA SIZE:

 WIDTH  (11.0 -36.0):

11.0 IN

 LENGTH

(8.3 – 1200.0):

8.5 IN

 

2.  Press the Previous or Next key to select WIDTH or LENGTH. 

3.  Press the Enter key to confirm the choice. 

4.  Use the numeric keypad to enter the desired value. 

5.  Press the Enter key to confirm the value. 

6.  Repeat steps 3 to 5 to enter the value for the remaining setting. 

7.  When the values for WIDTH and LENGTH are correct, press the 

Exit key to return to the READY screen. 

Preset allows you to select a predefined length to which the roll media 
should be cut during printing.  The associated width specification will 
depend on the Media Source selection.  If the Media Source selection 
is set to Auto, the system will select the roll of media that best matches 
the width specification.  If Media Source is set to  R1, R2, R3, or R4; the 
system will use the selected roll regardless of the width specification. 

To select the Preset mode: 

1.  Press the key beneath Output Format until the Preset indicator 

lamp illuminates.  The PRESET OUTPUT FORMAT screen is 
displayed.