Xerox 8830 User Manual

 

4.  Do one of the following: 

• 

For PREVIEW, press the Enter key to enable or disable the 
option.  A check mark appears in the box to the left of the option 
when the option is enabled.  The factory default setting is 
enabled. 

• 

For COMPRESSION, press the Previous or  Next key to 
highlight the desired setting.  Then press the Enter key to select 
the highlighted format. The choices are RAW and PACKBITS.  
The factory default setting is RAW 

5.  For FILE FORMAT, the selection is TIFF, Repeat steps 3 and 4 

to change the remaining setting, if desired. 

6.  Press the Enter key to confirm the selection. 

7.  Press the Exit  key to return to the Ready screen. 

 
Color — Select Color when scanning full color documents. When Color 
Type is select a version of the following screens will be displayed. The 
content of the screen will depend on the selected FORMAT and 
COMPRESSION. 
These screen will only be displayed in SCAN mode when the Scan to 
Net and Color Scanner feature keys are installed. The Normal and 
Photo LEDs will be lit when Color is selected. 

To select the scan options for  Color Mode: 

1.  Press the Mode key.  The  Please Enter Directory screen is 

displayed. 

2.  Enter the Directory Name. The READY TO SCAN INSERT 

DOCUMENT screen is displayed. 

3.  Select the Color by pressing the arrow key below Original, Type 

key until the Normal and Photo lights come on. The SCAN 
OPTIONS (COLOR) screen is displayed. 

4.  Use the  Enter key to enable/disable checkbox selection and the 

Next or Previous Key to select options with a colon (e.g. 
FORMAT: TIFF). 

The options available for selections displayed on the screen will change 
depending on the FORMAT and COMPRESSION that are selected. 
Listed below are the selections and available options and their definition: 

• 

PREVIEW - Use this checkbox to enable or disable the 
generation of a preview image for your scanned document. 
Default is enabled (checkbox is checked) 

• 

FORMAT - Use this selection to determine which format you 
would like to have the scanned image saved in, TIFF or JPEG. 
Default is TIFF. 

• 

COMPRESSION (TIFF selected) - Use this selection to 
determine the compression method to apply to the saved TIFF 
document. Select one of the following: 

• 

PACKBITS -  Saves the document as 24-bit RGB 
compressed.