Xerox 8830 User Manual

When using a Folder, the document must be inserted in the correct 
orientaqtion in order to have the title block visible after the copy is folded. 
Refer to the Finisher key information in the Special feature keys section 
of this manual for additional information to set up the desired fold and 
other Finisher options. Documents larger than 80 inches (2.1M) can only 
be partially folded. 

When using the Reduce/Enlarge feature and a Folder, you must orient 
and insert the document title block in the same orientation as the 
resulting enlargement or reduction copy size.  In addition, the 
recommended media should be used. 

For example: the job requires that an A (A4) document be enlarged to a 
C (A2) document.  To have the title block be visible after folding, the A 
(A4) document must be inserted as if it were a C (A2) document.   

You may want to refer to "CUSTOM R/E PRESETS" in the "Main Menu, 
COPY OPTIONS" section, and set up the 
REDUCTION/ENLARGEMENT default to show the standard reduction 
and enlargement.  Set the reduction /enlargement to display A to C (A4 
to A2) above the keys. 

To ensure that the selected fold is made correctly, it is critical that the 
document be centered on the Scanner Document Feed Tray when 
scanning. 

For additional folding and title block positioning information, refer to the 
Folder Operator Manual or the Folding Supplement CD.