Xerox 8830 User Manual

Below is an example of the READY TO SCAN screen.  Following the 
example are descriptions of the special information displayed on the 
screen. 

READY TO SCAN
INSERT DOCUMENT

   

400

TIFF/CCITTG4
1

1 BIT

 

TIFF/CCITTG
41 BIT 

This area indicates the selected file format.  Refer to 
SCAN OPTIONS (LINE) or SCAN OPTIONS (PHOTO) 
or SCAN OPTIONS (COLOR) to set these options. The 
available options will differ depending upon your Scan 
Option selection. 

 

 

This area shows the selected scanning resolution.  
Press the Previous or Next key to select a value of 100, 
200, 300, or 400 DPI (Dots Per Inch).  A new value can 
be selected before each scan. 

 

 

This icon shows how much Random Access Memory (RAM) 
is in use by the scanned file.  As space is used, the dark area 
increases.  After the scan is complete, the file is processed 
and then moved to the internal hard disk.  The RAM space 
then becomes available again. 

 

 

This icon shows how much hard disk space is in use by 
stored files.  As space is used, the dark area increases.  
When files are moved off the disk over the network to 
remote devices, the space becomes available again.  Files 
are also deleted when the age of the file exceeds the value 
set in the timer.  Refer to "Timers" in the "Main Menu" 
section to set this value.  The factory default is 24 hours. 

 

Certain selections available in COPY mode are not available in SCAN 
mode.  The unavailable selections are: 

• 

Sets  Build - In SCAN mode each document has a separate 
image stored on the disk.  Each image is separately retrieved at 
the remote device.  Images cannot be grouped in sets. 

• 

Specifying the media Source and Type - Since the output is now 
an electronic file, specifying the media is not applicable.