Toshiba e-STUDIO166 User Manual

Description of Each Component    27

Use this to display the number of copies set. The reproduction ratio appears here when the 
copy qty. / zoom display selecting button (7) is pressed.

The display of (6) is switched between copy quantity and reproduction ratio each time you 
press this button. The lamp beside the “%” mark is lit when the reproduction ratio appears.

Use this to interrupt the copy job in process and perform another one (= interrupt copying).
For the details of interrupt copying, see the following page:

Use this to let the equipment enter into the energy saving mode when the equipment is not 
used. The lamp is lit when the equipment is in the energy saving mode.
For the details of the energy saving mode, see the following page:

Use this to clear all setting changes.

Use this to stop the copy job in process or return the copy quantity keyed in to “1”.

Use this to start copying. Copies can be made when the lamp is lit. It blinks when the equip-
ment is waiting for copying to be started.
For basic copy operations, see the following page:

Use them to key in any number such as copy quantity.

Use this button to set the image quality of copy according to that of an original.
For the details of image quality, see the following page:

Use this button to adjust the density of copy image. The [AUTO] lamp below the 

 

(automatic copy density mode) button is lit when the density is being automatically adjusted.
For the details of density adjustment, see the following page:

The lamp blinks when an original or copy paper is jammed. The position where the lamp is 
blinking shows where the paper jam has occurred.