Xerox 180 EPS User Manual

1. Open a terminal window and enter the following:

 

NOTE:  No special logon is required to restart the Xerox 
software.

•

Problem:  You forget the Operator or Administrator password.

1. In a terminal window, enter the following:

2. Delete the following files:

–

.npw

–

.sum

NOTE: You must be logged in as “root” to delete these files.

NOTE: You must enable the Accounting Remote Purge utility 
again.

When the job seems to take too much time to process through the 
system, there may be a productivity or a performance problem.

1. Check the job status in the Job Manager window.

2. If the job status is <hold>, right click on the job list and select 

[Release] from the pop-up menu.

If the job status is <processing>, do the following:

–

Check the Print Services window. If the job is processing, 
you should see a message:

input to printer delayed

You can also check the performance meter. If the CPU 
activity is high, the decomposer is working.

–

If you have no message in the Print Services window or 
the CPU activity is low on the performance meter, the 
process has been stalled. Restart the DocuSP software.

3. Submit the job to a draft printer, if possible, to determine if the 

master is valid.

4. If the job prints on a draft printer, contact the customer support 

center.

If you have any removable peripherals (DVD player, tape drives, 
and so on) connected to the controller, keep the peripheral 
devices powered on, even when they are not in use.