Xerox 180 EPS User Manual
Operator Guide
5- 31
Troubleshooting
Figure 5-21 Press area 20 green lever
6. Remove any paper from the exposed area.
7. Press the green lever down and to the left until the latch
catches.
8. Close the bypass transport module door.
Clearing a misfeed (feeder tray fault)
1. If the Ready to Open indicator is not lit, press the Tray Unlock
button located on the feeder tray control panel.
Figure 5-22 If necessary, press Tray Unlock button
2. When the Ready to Open indicator lights, open the feeder tray.
Pull the tray all the way out for best results.