Xerox 180 EPS User Manual
Operator Guide
2-3
Managing the printer
Figure 2-2 Three levers in systems with small paper enablement
NOTE: Use the same pressure setting for all levers.
When the job is complete, return the levers to their normal
positions.
positions.
NOTE: Positioning may be affected by machine tolerance, the
paper supplier, or job type (for example, duplex).
paper supplier, or job type (for example, duplex).
Loading paper
Your printer may have up to six feeder trays: two processor trays
(trays 1 and 2) and two to four high-capacity trays (trays 3 through
6). Up to six different stocks may be used within a print job,
including oversized cover stock or tabs.
(trays 1 and 2) and two to four high-capacity trays (trays 3 through
6). Up to six different stocks may be used within a print job,
including oversized cover stock or tabs.
•
You can unlock, pull out, and load any tray from which paper is
not being fed, without interrupting printing.
not being fed, without interrupting printing.
•
If you open a tray that is in use, feeding switches to a backup
tray. If no tray is available, printing stops.
tray. If no tray is available, printing stops.
•
The printer stops feeding paper from any tray when a ¼-inch/6
mm stack remains in the tray.
mm stack remains in the tray.
1. Unlock the tray that you want to load, using one of the
following methods:
•
On the printer: Press the Tray Unlock button on the front
of the tray.
of the tray.
Turn to the right
Turn to the right
Turn to the left