Xerox 180 EPS User Manual
Operator Guide
3-1
3
Managing the system
This chapter provides management-related information that
pertains to the system as a whole such as starting, stopping, and
rebooting the system and operating the tape drives.
pertains to the system as a whole such as starting, stopping, and
rebooting the system and operating the tape drives.
Starting, stopping, and rebooting the system
Shut down and reboot the system only when you are directed in
the “Troubleshooting” chapter of this guide; or after loading new
software, such as Novell NetWare or AppleTalk gateways.
the “Troubleshooting” chapter of this guide; or after loading new
software, such as Novell NetWare or AppleTalk gateways.
CAUTION: Do not shut down the controller using the Quit option
on the pull-down menu of any window or the Exit option on the
Workspace pop-up menu.
on the pull-down menu of any window or the Exit option on the
Workspace pop-up menu.
Powering on the controller
Wait at least one minute after power has been switched off before
continuing. Then switch on power to the controller components in
the following order:
continuing. Then switch on power to the controller components in
the following order:
1. Any external SCSI devices, starting with the unit with the SCSI
terminator and following the connection chain toward the Sun
workstation
workstation
2. Other peripherals
3. Monitor
4. Sun workstation
When the operating system finishes rebooting, the Xerox
application software starts. When the DocuSP Print Services
window displays, power on the printer.
application software starts. When the DocuSP Print Services
window displays, power on the printer.
Powering on the printer
1. Make sure the printer power cord is securely plugged into the
power receptacle, and the power button is pressed on.
2. Log on as the Administrator or Operator.
3. On the DocuSP Print Services window, select [Printer On]
from the Printer menu.