Emulex NQ0V-NT+ User Manual

4-2   Chapter 4 
 

 

* Pre-compiled binaries for these system types are included on the 

distribution media, the distribution files do not need to be compiled during 
ENSTALL.

We recommend writing down the following parameters from the Setup 
Section in Chapter 2.  Refer to them during the installation procedure. 

Default Server Name: ____ ____ ____ ____ ____ ____ ____ ____ ____ 

IP Address: ___ ___ ___-___ ___ ___ -___ ___ ___-___ ___ ___ 

Subnet Mask: ___ ___ ___-___ ___ ___ -___ ___ ___-___ ___ ___ 

TCP port _______ (parallel port) 

TCP port _______ (parallel port) 

TCP port _______ (serial port) 

TCP port _______ (serial port) 

Telnet port number _______ 

RCF port number _______ 

Emulex recommends running the ENSTALL utility.  This user friendly 
utility automatically configures the UNIX host to support network printing 
via TCP/IP with Emulex printer servers. 

1)  Logon as root at the system prompt. 

2)  Change to a directory where third party software is typically installed. 

For example, /usr  

3)  Insert the CD-ROM into a drive. 

4)  Extract the files from the cd-rom to the hard drive. 

> 

#tar xvf mount_point/utils/ps50/unix/50.tar ./emlx