Emulex NQ0V-NT+ User Manual
8-12 Chapter 8
From the N
ET
B
IOS
A
DVANCED
O
PTIONS
window:
1) Select desired options.
2) Click OK.
This returns the user to the A
DD
N
EW
P
RINTER
window.
3) Click A
DD
.
The printer is now ready for use. Continue with the Test Printer section.
NOTE: The service to connect to on the Emulex printer
server must have the NetBios Protocol enabled
before printing.
before printing.
Test Printer
Test the printer as follows:
1) Close all windows.
2) Verify the printer and Emulex printer server are powered up and the
printer is on-line.
3) Select a text file (for example, README.TXT) from any folder.
4) Drag the file to the P
RINTER
icon.
5) Select P
LAIN
-T
EXT
when prompted.
The file should print.
NOTE: LAN Server does not validate the Service Name, IP
Address, or Port Number parameter values. If the
printer changes to the off-line state when
attempting to print, check that the above
parameters have been entered correctly.
printer changes to the off-line state when
attempting to print, check that the above
parameters have been entered correctly.