Epson T7270 User Manual

Epson SureColor T-Series User’s Guide

This section describes the procedure to scan on the 
control panel of the printer. 

Buttons that are used in the following settings

1

Turn on the printer by pressing the P button. 

If the printer is turned on, the scanner is also 
turned on. 

2

Load paper suitable for the large scan function 
of the printer. 

3

Load document on the scanner. 

4

Make sure that the Large copy/Large scan screen 
appears. 

If another screen appears, use the l/r buttons 
to select the 

 tab. 

5

At Large copy/Large scan screen, use the d/u 
buttons to select Scan and press the Z button. 

A screen appears to select the save/send 
destination of the scanned file. 

6

Use the d/u buttons to select save/send 
destination and press the Z button. 

If the HDD was selected, proceed to Step 8. 

If Shared Folder or Send By Mail was selected, 
proceed to Step 7. 

7

Use the d/u buttons to select the save 
destination folder or address, and then press the 
Z

 button. 

8

The details of the main scan settings appear. 
When the Z button is pressed, scanning starts. 

To change the settings, press the Menu button 
to display the Scan Setting menu. 

Using the Scan Setting menu

U

Settings

U

9

When scanning has finished, the screen returns 
to the one in Step 8. Press the r button to eject 
the document. When the Z button is pressed 
after loading the document, you can continue 
saving or sending scanned files to the same 
save/send destination. 

After scanning has finished, always eject the 
document. If the next document is loaded with 
the previous document still inside, the next 
document cannot be fed correctly. 

You can change the eject direction of the 
document. 

Changing the eject direction

U

After copying or scanning has finished, you can change 
the eject direction when the document eject operation 
is performed. The default setting is forward ejection.