Xerox 7665 User Manual
84
To identify the trap
To identify the trap, create a device description from your terminal's command line.
1.
Select the F-4 key to prompt the CRTDEVPRT command. Enter the following parameters: Device
Description: Xeroxprinter
Description: Xeroxprinter
Device Class: *lan
Device Type: 3812
Device Model: 1
2.
Press Enter to continue, and enter the following parameters: Lan Attachment: *IP
Port Number: 9100
Online at IPL: *yes
Font Identifier: 11
Form Feed *autocut
Note: For some versions of AS400, the default may match some of these parameters.
3.
Leave all other parameters at their defaults, press Enter, and enter the following parameters:
Activation Timer: 170
Activation Timer: 170
Inactivity Timer: *sec15
Host Print Transform: *yes
4.
Press [Enter] to continue, and enter the following parameter: Manufacturer Type and Model: *hp5si
5.
Leave the remaining parameters set to their default values and press Enter to continue. Enter the
following parameters: Remote Location: Enter the IP address of the printer.
following parameters: Remote Location: Enter the IP address of the printer.
User defined options: *IBMSHRCNN
System driver program: *IBMSNMPDRV
6.
Leave all other options set to the default values and press Enter. A message indicates that you
created the device Xeroxprinter.
created the device Xeroxprinter.
7.
Set the device on and start a print writer. Then place a spool file in the appropriate queue to test the
printer.
printer.