D-Link DP-301P User Manual

DP-301P Print Server Hardware Guide

steady long flashes

Firmware Reload Required

continuously on

DRAM Error

One long, two short flashes

Timer INT Error

One long, three short flashes

Flash Protected

One long, four short flashes

Flash ID Error

One long, five short flashes

Flash Erase / Program Error

One long, six short flashes

LAN Controller Error

One long, seven short flashes

LAN Memory Error

One long, eight short flashes

Parallel Controller Error

One long, nine short flashes

LPT Error

steady short flashes

EEPROM Error

One long, eleven short flashes

LAN I/O Base error

In the event of a Firmware Reload Required error at startup,
proceed according to instructions given in the PS Admin User’s
Guide

 ("PS Admin Administration" section, under the heading

"Upgrading the Print Server's Internal Firmware").

In the event that any of the other listed error conditions is
encountered on startup, contact your dealer for correction of the
fault.

The PS Admin software includes a Print Test function for
confirmation of print server connections and functions. This
operational test can be performed after you have installed the PS
Admin

 software and completed the PS Admin procedures for

configuring the DP-301P. See the instructions given in the PS
Admin User’s Guide

 ("Getting Started Setting up Your Print

Server" section, under the heading "Testing your Print Server").