Toshiba 355 User Manual

118    Error Codes

2B90

Insufficient Memory.

Turn the power OFF and then back ON. Retry the scan. 
If the error still occurs, contact your service 
representative.

2BA0

Invalid Box password specified.

Make sure that the password is correct and retry the 
scan, or reset the password and retry the scan. When 
this error occurs for the print of the data in the e-Filing, 
perform the print with the administrator’s password. If 
the recovery is still not completed or in case of invalid 
password for the operation other printing (opening the 
file, etc.), contact your service representative.

2BA1

Incorrect paper size or color mode

This size or color mode is not supported by e-Filing. 
Check the paper size or color mode. 

2BB0

Job canceled

(Job was canceled.)

2BB1

Power failure occurred

Make sure that the power cable is connected properly 
and it is inserted securely. Resend the job.

2BC0

System fatal error.

Turn the power OFF and then back ON. Retry the scan. 
If the error still occurs, contact your service 
representative.

2BC1

Failed to acquire resource.

Turn the power OFF and then back ON. Retry the scan. 
If the error still occurs, contact your service 
representative.

2BD0

Power failure occurred during restoring.

Make sure that the power cable is connected properly 
and it is inserted securely. Resend the job.

2BE0

Failed to obtain the machine parameters.

Turn the power OFF and then back ON. Retry the scan.

2BF0

Reached the maximum number of pages.

Reduce the pages and print again.

2BF1

Reached the maximum number of documents.

Delete the documents from the boxes or folders.

2BF2

Reached the maximum number of folders.

Delete the folders from the boxes.

2500

Syntax error, command unrecognized

Check whether the Terminal mail address and 
Destination mail address are correct. Check whether 
the mail server is operating properly. Turn the power 
OFF and then back ON. Perform the job in error again.

2501

Syntax error in parameters or arguments

Check whether the mail server is operating properly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error still occurs, 
contact your service representative.

2503

Bad sequence of commands

Check whether the mail server is operating properly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error still occurs, 
contact your service representative.

2504

Command parameter not implemented

Check whether the mail server is operating properly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error still occurs, 
contact your service representative.

2550

Mailbox unavailable

Confirm that the destination Email addresses are 
correct.
Check the access privilege for the mailbox in the mail 
server.

2551

User not local

Confirm that the destination Email addresses are 
correct.
Check whether the mail server is operating properly.

2552

Insufficient system storage

File is too large for mailbox. Confirm the mailbox size 
on the mail server. Transmit again in text mode or with a 
lower resolution. If the error still occurs, divide the 
document and transmit again.

2553

Mailbox name not allowed

Check if there is an illegal character in the mail box 
name in the mail server.