Epson 1080 User Manual
52
Maintenance
8. Gently insert the new lamp and tighten its screws.
Caution: Don’t touch the glass portion of the lamp assembly. Touching the glass could result
in premature lamp failure.
in premature lamp failure.
9. Replace the lamp cover. (The projector won’t work if the lamp cover is open or loose.)
10. Reset the lamp usage timer, as described on page 52.
Resetting the Lamp Usage Timer
After replacing the lamp, plug the projector back in, turn on the power switch on the back,
and press the P
and press the P
Power
button. Then follow these steps to reset the lamp usage timer:
1. Press the
Menu
button on the projector or remote control.
2. Use the menu navigation buttons to open the
Reset
menu, then select
Reset Lamp
Hours
.
3. When you see a confirmation prompt, highlight
Yes
and press the
Select
button.
4. When you’re finished, press the
Menu
button to exit.
The lamp usage timer shows 0H until you’ve used the lamp for at least 10 hours.
PowerLite Home Cinema 1080.book Page 52 Tuesday, February 5, 2008 4:46 PM