Benq PE6800 User Manual
8
Safety, Regulatory and Legal Information
Moisture Condensation
Never operate the projector immediately after moving it from a cold loaction to a hot location. When the
projector is exposed to such a change in temperature, moisture may condense on the crucial internal parts. To
prevent the projector from possible damage, do not use the projector for at least 2 hours when there is a sudden
change in temperature.
projector is exposed to such a change in temperature, moisture may condense on the crucial internal parts. To
prevent the projector from possible damage, do not use the projector for at least 2 hours when there is a sudden
change in temperature.
Avoid Volatile Liquid
Do not use volatile liquids, such as insecticide or some types of cleaner, near the projector. Do not have rubber
or plastic products touching the projector for a long time. They will leave marks on the finish. If cleaning with a
chemically saturated cloth, be sure to follow the product’s safety instructions.
or plastic products touching the projector for a long time. They will leave marks on the finish. If cleaning with a
chemically saturated cloth, be sure to follow the product’s safety instructions.
Disposal
This product contains the following materials which are harmful to human bodies and environment.
•
Lead, which is contained in solder.
•
Mercury, which is used in lamp.
To dispose the product or used lamps, consult your local environment authorities for regulations.
Safety Instructions (Continued)
8.
Do not place this unit in any of the following
environments.
environments.
- Space where is poorly ventilated or confined. Allow at
least 50 cm clearance from walls and free flow of air
around the projector.
- Locations where temperatures may become excessively
high, such as the inside of a car with all windows rolled
up.
- Locations where excessive humidity, dust, or cigarette
smoke may contaminate optical components,
shortening the projector’s lifespan and darkening the
screen.
- Locations near fire alarms
- Locations with an ambient temperature above 35°C /
- Locations with an ambient temperature above 35°C /
95°F
9.
Always place the unit on a level, horizontal
surface during operation.
surface during operation.
- Do not use if tilted at an angle of more than 10 degrees
left to right, nor at angle of more than 15 degrees front
to back. Using the unit when it is not fully horizontal
may cause a malfunction of, or damage to, the lamp or
other components.
10. Do not stand the unit on end vertically.
Doing so may cause the unit to fall over, causing injury
or resulting in damage to the unit.
11. Do not step on this unit or place any objects
upon it.
Besides probable physical damage to the unit, doing so
may result in accidents and possible injury.
12. Do not place liquids near or on the projector.
Liquids spilled into the projector may cause it to
fail. If the projector does become wet, disconnect
it from the power supply’s wall socket and call
BenQ to have the projector serviced.
fail. If the projector does become wet, disconnect
it from the power supply’s wall socket and call
BenQ to have the projector serviced.