Runco DR-300c User Manual

Features and Benefits

• Full control of the Projector via the PFP Controller. This control includes all image quality   

adjustments as well as Projector adjustments such as image configuration.

• 1000 ANSI lumens light output.

• Reliable lamp with 1000 hour life span.

•

Native 1024 x 768, Widescreen 1024 X 576

• RGB/Component (via 15 pin connector) port for DTV or computer signals. RGB and    

Component signals are automatically detected by the Projector for ease of operation.

• An adaptive two-dimensional comb filter that greatly reduces artifacts when using 

Composite video.

• A Luma edge enhancement circuit makes the edges of objects appear sharper without the 

ringing and noise associated with traditional sharpness circuits.

• A Chroma edge enhancement circuit is included to compensate for lower chroma resolution 

found in composite and S-Video.

• Inverse telecine (3:2 pulldown) detection and processing allows the scaler to almost

completely eliminate interlace artifacts associated with other scalers.

• System can be configured for 4:3 screens, 16:9 screens or 16:9 screens with an anamor-      

phic lens installed.

• Aspect ratio control for either 16:9 or 4:3 screens provides anamorphic, 4:3 and letterbox 

ratios.

• A Time Base corrector circuit is provided for unstable sources such as VCRs.

• 12v outputs for drop screens and screen masking.

• Automatic switching between NTSC and PAL signals.

• Fully RS-232 controllable, with direct access to sources and aspect ratios.

• A simple remote controls all aspects of operation, and includes discreet on/off, aspect ratio 

and source selection commands.

8