Epson EB-1970W User Manual
Related Links
Installing the USB Display Software
The first time you connect the projector to a computer using a USB cable,
you must install the Epson USB Display software. You do not need to
install the software the next time you connect.
you must install the Epson USB Display software. You do not need to
install the software the next time you connect.
a
If you are connected to multiple image sources, you may need to
change the image source to USB Display.
change the image source to USB Display.
a
Connect a USB cable to the computer's USB port and to the
projector's USB-B port.
projector's USB-B port.
a
If you are using Windows 2000 or Windows XP and you see a
message asking if you want to restart your computer, select
No
message asking if you want to restart your computer, select
No
.
b
Do one of the following to install the software:
• Windows 2000: Double-click Computer > EPSON_PJ_UD >
EMP_UDSE.EXE
.
• Windows XP: Installation starts automatically.
a
If it is not installed automatically, double-click My Computer >
EPSON_PJ_UD
EPSON_PJ_UD
> EMP_UDSE.EXE.
• Windows Vista/Windows 7/Windows 8/Windows 8.1: When the
dialog box is displayed, click Run EMP_UDSE.EXE.
• OS X: The USB Display Setup folder is displayed in Finder.
Double-click the USB Display Installer icon and follow the on-
screen instructions.
screen instructions.
a
If the USB Display Setup folder is not displayed automatically,
double-click EPSON_PJ_UD > USB Display Installer.
double-click EPSON_PJ_UD > USB Display Installer.
c
Follow any on-screen instructions.
After a moment, computer images are projected. Do not disconnect
the USB cable or turn off the power to the projector until the images
are projected.
the USB cable or turn off the power to the projector until the images
are projected.
a
If nothing is projected, do one of the following:
• Windows: Click All Programs > EPSON Projector > Epson
• Windows: Click All Programs > EPSON Projector > Epson
USB Display
> Epson USB Display Ver.x.xx.
• OS X: Click the USB Display icon in the Dock.
d
When you finish projection, do one of the following:
• Windows: Disconnect the USB cable. There is no need to use
Safely Remove Hardware
.
• OS X: Select Disconnect from the USB Display icon menu on the
menu bar or Dock and disconnect the USB cable.
Projecting with USB Display
54