Lanner electronic 19" 1U Intel Pentium 4 Socket T Rackmount Network Security Platform User Manual

 

        

 

On-Chip (Primary/Secondary) PCI IDE : The integrated peripheral controller contains an 
IDE interface with support for two IDE channels. Select Enabled to activate each channel 
separately.  

      

On-Chip Serial ATA : The integrated peripheral controller contains an Serial ATA interface 
with support for two Serial ATA channels. Select Enabled to activate each channel separately.  

 

IDE Primary / Secondary Master / Slave PIO : The four IDE PIO (Programmed Input/Output) 

fields let you set a PIO mode (0-4) for each of the four IDE devices that the onboard IDE 

interface supports. Modes 0 through 4 provide successively increased performance. In Auto 

mode, the system automatically determines the best mode for each device.  The settings are 

“Auto”, “Mode 0”, “Mode 1”, “Mode 2”, “Mode 3”, “Mode 4”. 

IDE Primary / Secondary Master / Slave UMDA : Ultra DMA/66 implementation is possible only if your IDE 

hard drive supports it and the operating environment includes a DMA driver (Windows 98 OSR2 or a 

third-party IDE bus master driver). If your hard drive and your system software both support Ultra 

DMA/66, select Auto to enable BIOS support.  The settings are “Auto” and “Disabled”. 

Onboard Device : Scroll to this item and press <Enter> to view the following screen: 

USB Controller: Select Enabled if your system contains a Universal Serial Bus (USB) 
controller and you have USB peripherals 

USB Keyboard Support : Select Enabled if your system contains a Universal Serial Bus (USB)