Billion Electric Company VGP User Manual

Page of 120
VoIP/(802.11g) ADSL2+ Router 
 
 
 
Special dial codes  
The following table lists the special dial codes that are built-in to the system:  
Option Description 
Flash-hook 
(Wireless Router with LINE 
port only) 
Switch to PSTN line 
Note: A quick press of the hook. On some phones a button is provided 
which provides Flash-hook functionality. The button is marked "FLASH" 
or "RECALL". 
*69 
Return the last missed call for SIP service only 
Note: Entering this on a phone will call the last number which made a 
call to the phone. For example A makes a call to B, but hangs up before 
B answers. If B enters *69, A will be called. 
## 
Last number redial 
*20 
Set do not disturb on 
Note: It is possible to set a Do-Not-Disturb feature on a phone such that 
any phone which calls the phone will receive an engaged tone and the 
phone called will not ring. For example, B enters *20 and hangs up. A 
makes a call to B, and receives the engaged tone and phone B does not 
ring. 
*80 
Set do not disturb off 
*74<x><number># 
Set the number for Speed dial code ‘x’, where ‘x’ is a 
number between 2 and 9. 
Note: Where <x> is a number between 2 and 9, and <number> is the 
number to dial. The code needed to dial a speeddial from a phone 
connected to a VoIP Router is: 
 <x>#, where <x> is a number between 2 and 9. 
The settings will infect to your setting in Speed Dial on WEB GUI. 
*90<phone-number> 
Set the number for performing Blind Call Transfer, where 
<phone-number> is the number that you wish to transfer the 
call to. It’s for SIP service only. 
Note: In Blind Call Transfer, you have a call in progress (incoming or 
outgoing) and decide you wish to transfer the call to another phone. To 
transfer the call, perform the following steps: 
1. Hook-flash to get a dial tone. 
2. Dial *90<phone-number> (e.g. *907401), there will be a confirmation 
tone then hang up. The other end will hear ring back and the called third-
party phone will ring. When the third-party phone is picked up the two 
calls will be connected. 
If the third-party phone does not answer then the caller being transferred 
can hang up to cancel the connect attempt.
 
 
87
Chapter 4: Configuration