ZyXEL Communications P-334W User Manual
Prestige 334W User’s Guide
WAN Screens
9-5
Figure 9-3 PPPoE Encapsulation
The following table describes the labels in this screen.
Table 9-3 PPPoE Encapsulation
LABEL DESCRIPTION
ISP Parameters for Internet Access
Encapsulation
The PPP over Ethernet choice is for a dial-up connection using PPPoE. The Prestige
supports PPPoE (Point-to-Point Protocol over Ethernet). PPPoE is an IETF Draft
standard (RFC 2516) specifying how a personal computer (PC) interacts with a
broadband modem (i.e. xDSL, cable, wireless, etc.) connection. Operationally, PPPoE
saves significant effort for both the end user and ISP/carrier, as it requires no specific
configuration of the broadband modem at the customer site. By implementing PPPoE
directly on the router rather than individual computers, the computers on the LAN do
not need PPPoE software installed, since the router does that part of the task. Further,
with NAT, all of the LAN's computers will have access.
supports PPPoE (Point-to-Point Protocol over Ethernet). PPPoE is an IETF Draft
standard (RFC 2516) specifying how a personal computer (PC) interacts with a
broadband modem (i.e. xDSL, cable, wireless, etc.) connection. Operationally, PPPoE
saves significant effort for both the end user and ISP/carrier, as it requires no specific
configuration of the broadband modem at the customer site. By implementing PPPoE
directly on the router rather than individual computers, the computers on the LAN do
not need PPPoE software installed, since the router does that part of the task. Further,
with NAT, all of the LAN's computers will have access.
Service Name
Type the PPPoE service name provided to you. PPPoE uses a service name to identify
and reach the PPPoE server.
and reach the PPPoE server.
User Name
Type the User Name given to you by your ISP.
Password
Type the password associated with the User Name above.
Retype to
Confirm
Confirm
Type your password again to make sure that you have entered is correctly.