ZyXEL Communications P-334W User Manual
Prestige 334W User’s Guide
31-4
SNMP Configuration
31.4 SNMP Traps
The Prestige will send traps to the SNMP manager when any one of the following events occurs:
Table 31-2 SNMP Traps
TRAP #
TRAP NAME
DESCRIPTION
1 coldStart
(defined in RFC-1215)
A trap is sent after booting (power on).
2 warmStart
(defined in RFC-1215)
A trap is sent after booting (software reboot).
3 linkDown
(defined in RFC-1215)
A trap is sent with the port number when any of the links
are down. See the following table.
are down. See the following table.
4 linkUp
(defined in RFC-1215)
A trap is sent with the port number.
5 authenticationFailure
(defined in
RFC-1215)
A trap is sent to the manager when receiving any SNMP
gets or sets requirements with wrong community
(password).
gets or sets requirements with wrong community
(password).
6
whyReboot (defined in ZYXEL-
MIB)
MIB)
A trap is sent with the reason of restart before rebooting
when the system is going to restart (warm start).
when the system is going to restart (warm start).
6a
For intentional reboot :
A trap is sent with the message "System reboot by user!" if
reboot is done intentionally, (for example, download new
files, CI command "sys reboot", etc.).
reboot is done intentionally, (for example, download new
files, CI command "sys reboot", etc.).
The port number is its interface index under the interface group.
Table 31-3 Ports and Permanent Virtual Circuits
PORT PVC (PERMANENT VIRTUAL CIRCUIT)
1 Ethernet
LAN
2 1
3 2
… …
13 12
14 xDSL