ZyXEL Communications P-334W User Manual

Prestige 334W User’s Guide 

Firmware and Configuration File Maintenance   

34-7 

For details about backup using (T)FTP please refer to earlier sections on FTP and TFTP file upload in this 
chapter. 

Step 1.  Launch the FTP client on your computer. 

Step 2.  Enter “open”, followed by a space and the IP address of your Prestige.   

Step 3.  Press [ENTER] when prompted for a username. 

Step 4.  Enter your password as requested (the default is “1234”). 

Step 5.  Enter “bin” to set transfer mode to binary. 

Step 6.  Find the “rom” file (on your computer) that you want to restore to your Prestige. 

Step 7.  Use “put” to transfer files from the Prestige to the computer, for example, “put config.rom rom-0” 

transfers the configuration file “config.rom” on your computer to the Prestige. See earlier in this 
chapter for more information on filename conventions. 

Step 8.  Enter “quit” to exit the ftp prompt. The Prestige will automatically restart after a successful 

restore process. 

Menu 24.6 -- System Maintenance - Restore Configuration 

To transfer the firmware and configuration file to your workstation, follow the procedure 

below: 

 

1. Launch the FTP client on your workstation. 

2. Type "open" and the IP address of your Prestige. Then type "root" and 

   SMT password as requested. 

3. Type "put backupfilename rom-0" where backupfilename is the name of 
   your backup configuration file on your workstation and rom-0 is the 

   remote file name on the Prestige. This restores the configuration to 

   your Prestige. 

4. The system reboots automatically after a successful file transfer 

 

For details on FTP commands, please consult the documentation of your FTP 
client program. For details on backup using TFTP (note that you must remain 

in this menu to back up using TFTP), please see your Prestige manual. 

 

 

Press ENTER to Exit: