ZyXEL Communications P-334W User Manual
Prestige 334W User’s Guide
Wireless Configuration and Roaming
7-5
A large Fragmentation Threshold is recommended for networks not prone to interference while you should
set a smaller threshold for busy networks or networks that are prone to interference.
If the Fragmentation Threshold value is smaller than the RTS/CTS value (see previously) you set, then the
RTS (Request To Send)/CTS (Clear to Send) handshake will never occur as data frames will be fragmented
before they reach RTS/CTS size.
set a smaller threshold for busy networks or networks that are prone to interference.
If the Fragmentation Threshold value is smaller than the RTS/CTS value (see previously) you set, then the
RTS (Request To Send)/CTS (Clear to Send) handshake will never occur as data frames will be fragmented
before they reach RTS/CTS size.
7.3 Configuring
Wireless
If you are configuring the Prestige from a computer connected to the wireless LAN
and you change the Prestige’s ESSID or WEP settings, you will lose your wireless
connection when you press Apply to confirm. You must then change the wireless
settings of your computer to match the Prestige’s new settings.
Click the WIRELESS link under ADVANCED to open the Wireless screen.
Figure 7-5 Wireless
The following table describes the general wireless LAN labels in this screen.
Table 7-1 Wireless
LABEL DESCRIPTION
Enable
Wireless LAN
Wireless LAN
Click the check box to activate wireless LAN.