ZyXEL Communications VSG1432-B101 Series User Manual

Chapter 7 Wireless

VSG1432-B101 Series User’s Guide

Use this screen to enable Wi-Fi MultiMedia (WMM) and WMM Power Save in 
wireless networks for multimedia applications.

Connect

Click this button to add another WPS-enabled wireless device (within 
wireless range of the ZyXEL Device) to your wireless network. This 
button may either be a physical button on the outside of device, or a 
menu button similar to the Connect button on this screen.

Note: You must press the other wireless device’s WPS button 

within two minutes of pressing this button.

Method 2

Use this section to set up a WPS wireless network by entering the PIN 
of the client into the ZyXEL Device.

Register

Enter the PIN of the device that you are setting up a WPS connection 
with and click Register to authenticate and add the wireless device to 
your wireless network.

You can find the PIN either on the outside of the device, or by checking 
the device’s settings.

Note: You must also activate WPS on that device within two 

minutes to have it present its PIN to the ZyXEL Device.

Method 3

Use this section to set up a WPS wireless network by entering the PIN 
of the ZyXEL Device into the client.

Release 

Configuration

The default WPS status is configured.

Click this button to remove all configured wireless and wireless security 
settings for WPS connections on the ZyXEL Device.

Generate 

New PIN 

Number

The PIN (Personal Identification Number) of the ZyXEL Device is shown 
here. Enter this PIN in the configuration utility of the device you want 
to connect to using WPS.

The PIN is not necessary when you use WPS push-button method.

Click the Generate New PIN Number button to have the ZyXEL 
Device create a new PIN. 

Apply

Click Apply to save your changes.

Cancel

Click Cancel to restore your previously saved settings.

Table 17   Network Settings > Wireless > WPS